| Customization: | Available |
|---|---|
| Transport Package: | The Pressure Barrel Is Packed and Shipped in a Car |
| Specification: | 10L-60L |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Installation method |
| 1 After loosening the wing nut and slip-knot bolt, remove the lid of the bucket. 2 Pour the paint. 3 Put on the lid of the bucket, and tighten the butterfly nuts one by one by sealing the corners. 4 Connect the air supply pipe to the air intake pipe head on the barrel (the air supply pipe passes through a filter to filter out dust, impurities, moisture or oil in the compressed air). 5 Connect the air outlet to the air outlet. 6 Hand crank the stirring rod and rotate the blade clockwise or counterclockwise to stir the paint 7 Connect the paint pipe to the paint outlet. 8 Turn on the air supply system, and adjust the pressure regulating valve clockwise to the required working pressure. If you want to reduce the pressure in the barrel, turn it counterclockwise. 9 Open the air outlet. 10 Open the paint outlet. |
| Precautions |
| This product L10 (L20) allows the paint to be pressurized to 3.5Kg/cm, and the L40 (L60) type is allowed to pressurize to 2Kg/cm. If the pressure exceeds the allowable range, it may cause an explosion. |
| The safety valve on the barrel is a device used to protect the pressure barrel from overpressure. It has been set within the allowable pressure range before leaving the factory. Under normal use, please do not adjust it at will. |
| Do not do any dangerous actions such as iron or welding on the barrel body, because it may produce a tempering effect and damage the barrel body and reduce its life. |
){kind=link}